www.directionalantennas.com
Home
 
 
microstrip patch antennas

Microstrip Patch Array Wireless Antennas

Microstrip patch array wireless antennas are great for both indoor and outdoor use. Microstrip Antennas' small profiles are very unobstructive to the environment. These Microstrip Patch Antennas work well as indoor access points, as a short-range bridge antenna, or as a low cost CPE solution.

Microstrip patch array antennas are totally enclosed in low-profile radomes and are able to mount to any flat indoor surface or outside mast. These Patch Antenna are designed to be used as a Client antenna in any WLAN or WISP system. They have a nominal VSWR of 1.5:1 and are less than 2:1 over the 2400-2484 MHz frequency band. Directive gain ranges from 8.5 dBi and up.

 
2401 microstrip patch wireless antenna
Click on image to enlarge

2401 Microstrip Patch Array Antenna

2.4 GHz 8.5 dBi Microstrip Patch Antenna
 

The 2401 Microstrip Patch Antenna is an 8.5 dBi directional microstrip patch wireless antenna for the 2.4 GHz band. This microstrip patch antenna may be used in WLAN or WISP applications, either indoors or outside. This microstrip patch antenna may be mounted for either Vertical or Horizontal polarization, and comes with hardware for either mast or wall attachment.

   
2401AA - N Female
2401AC - RP-TNC Male
$49.99
2405 microstrip patch wireless antenna
Click on image to enlarge

2405 Microstrip Patch Array Antenna

Low Profile Ceiling-Mount WLAN Antenna -
RP-TNC Connector
 

The 2405 Microstrip Patch Antenna is a 5 dBic wide-angle directional CP patch antenna for 2.4 GHz. The 2405 Patch Antenna is an excellent choice for a low profile wall or ceiling-mounted wireless antenna. It is designed to be mounted to a flat surface by screws, adhesive strips or an optional ceiling-rail bracket. The polarization is LHCP, so that it will respond equally to either vertically or horizontally polarized signals in a typical indoor environment.

   
2405AA - RP-TNC Male
$59.99